Steel Coil Specifications

 

Spec #:           3

Date:               11/16/2007

Revision #:      A

 

 

Flatness  Must Meet ASTM A568
Width Tolerance  +/- .005
Coil ID   17”-20”    OD Not to exceed 54”
Chemical Characteristics Must Meet ASTM A366
Thickness Min. to Mid Range of Gage
Formability Must Meet ASTM A366
Hardness ROCKWELL 45-60 B Scale
Finish CQ Class 1 Matte
Skid Weight 3,000 lbs max. skid weight
Packaging Two 4” x 4” running lengthwise with 2 runners crosswise. Side unloads with forklift.
Tagging Each skid/load must be identified with Sintel, part number, work order number (if supplied) and purchase order number.  One part per skid.
Replacement Time for Rejections 48 hours unless arrangement have been made.  NCR (Nonconforming Material Report) must be returned with cause and corrective action by due date.

*** NOTE ***

Supplier must send packing list with every shipment stating that he material shipped is in compliance with Sintel specification sheet #3.  If material is not in compliance with specification, supplier is liable for rejected material and/or down time and sorting time costs at Sintel Inc.

Burr tolerances and Sharp edges.  All parts must be free of sharp edges and  the maximum allowable burr is 10% of material  thickness . Burrs in excess of 10% must be removed prior too shipment.

Preservation of Parts.   All metal parts must be coated with a water soluble rust preventative (shape part number Bio Solutions # 48 or equivalent) that contains no silicone and can be removed in a normal paint wash system. The product must have a shelf life of six months from date of receipt of the product by Sintel.

Copyright 2005 Sintel, Incorporated. All rights reserved.
Revised:  November 16, 2007 04:48 PM.